PCI-X Single Port RS422/485 Card
PCI-X Dual Port RS422/485 Board
PCI Express RS422/485 Adapter
PCI Express Dual RS422/485 Adapter
PCI Express Quad RS422/485 Adapter
PCI PCI Express and PCI-X RS422/485 Adapter Cards
Single Serial PCI-X 3.3V RS422/485
Single Serial PCI 5V RS422/485
Dual Serial PCI/PCI-X 3.3V/5V RS422/485
Dual Serial PCI Express RS422/485
SS400 PCI-X 64 bit 3.3Volt (3.3V) Serial Communication Adapter Card/Board RS422/485 Galvanically isolated
 | Compatible with 3.3 volt (3.3V) PCI-X 64 bit expansion slots - Dell, Compaq, IBM, Intel chassis |
| State-of-the-art advanced design permits high baud rates with ESD protection and Isolation |
| 32 / 64 Bit PCI / PCI-X 64 bit bus slots (3.3 volts (3.3V) only) |
| Low Profile/Half Height and Standard Height Mounting brackets included |
| 2500 volt Isolation with onboard DC-DC isolated converter |
| 15kv ESD Static Protection (25 kv optional) |
| 128 Byte Transmit / Receive Buffers |
| Hardware Auto-Flow Control |
| Full / Half Duplex serial communication support |
| Maximum serial communication Baud Rate 15 Megabaud (requires clock change) |
| Supports up to 921k baud serial communication without clock change |
| Thermal and Current protected transceivers |
| Multiple serial communication adapter board/cards may be installed for additional serial ports |
| Device Driver support for: Vista, Win 95/98, Win ME, Win XP/XP Pro, Win NT/NT Server, Win 2000/2003 32/64 bit Server, Linux (Contact us for details) |
| 5 year warranty |
SS400 
[an error occurred while processing this directive]
SS500 PCI 5Volt (5V) Serial Communication Adapter Card/Board RS422/485 Galvanically isolated
| Single High Speed RS422/RS485 PCI compatible Serial Port |
| Low Profile MD1 Size (121.79 mm) |
| Bracket Height 79.2 mm (3.118") |
| Standard & Low Height Brackets included |
| Use in 32 bit 5 volt PCI expansion slots |
| 16C950 UART |
| 128 Byte Transmit / Receive Buffers |
| Slew Rate controlled 10 Mbaud RS422/RS485 Transceiver |
| Maximum Baud Rate 10 Megabaud (requires clock change) |
| Support up to 921k baud without clock change |
| Plug & Play Compatible |
| RS422/RS485 Electrical Interface |
| Full / Half Duplex Support |
| Onboard Power status LED indicators |
| 25 kv ESD + 25 Kv HBM Surge Protection |
| Thermal and Current protected transceivers |
| +5 Volt Only PCI Design |
| 2500 volt Isolation with onboard DC-DC isolated convertor |
| PCI Bus 2.2 Compatible |
| Power Management 1.0 Compliant |
| Compatible with AMD Athlon / Pentium CPU Motherboards |
| Low Noise 4 Layer PCB |
| Device Driver support for: Vista, Win 95/98, Win ME, Win XP/XP Pro,Win NT/ T Server, Win 2000/2003 32/64 bit Server, Linux |
| 5 year warranty |
SS500
[an error occurred while processing this directive]
DS460 PCI 5V Dual RS422/485 Serial Communication Adapter Board/Card
|
Dual (2) High Speed 16950 PCI Serial Ports |
|
16C950 UART |
|
128 Byte Transmit / Receive Buffers |
| TX+ and TX- lines RX+ and RX- lines |
| RS422 / RS485 switch selectable operation modes |
| RS422 Mode TX and RX ACTIVE |
| RS485 Full / Half Duplex support |
| 15kv ESD HBM Surge Protection (25kv IEC61000-4-5 optional) |
| Fail Safe Receiver Biasing |
| RS485 Auto-gating of the transmitter via hardware |
| Plug & Play Compatible |
| Support for TX and RX line reversals |
| Slew Rate controlled transceivers for Error-free communications |
| Short-Circuit and current protected transceivers |
| Onboard switch selectable 120 ohm terminators (user provided terminators are optional) |
| Default clock 1.8432 Mhz (460k max operation). Higher speeds will require optional clock modification |
| +5 Volt Only PCI Bus Design |
| PCI Bus 2.2 Compatible |
| Power Management 1.0 Compliant |
| Compatible with AMD Althlon / Pentium CPU Motherboards |
| Low Noise 4 Layer PCB |
| IRQ Sharing Capable (Both ports use SINGLE Interrupt) |
| FCC Class B and CE Approved |
| Device Driver support for: Vista, Win 95/98, Win ME, Win XP/XP Pro Win NT/NT Server, Win 2000/3/ 2000/3 32/64 bit Server, Embedded XP, Linux (Call for info) |
| 5 year warranty |
DS460
[an error occurred while processing this directive]
DS450 PCI-X 64 bit 3.3Volt (3.3V) /5V Dual RS422/485 Serial Communication Adapter Board/Card
| Universal PCI Connector, 3.3Volt (3.3V) and 5V |
| MD1 Low Profile/Half Height PCI Board/Card - fits 2U racks without riser cards (Standard height bracket supplied) |
| Two independent serial RS422/485 communication interfaces |
| Auto enable/disable RS-422/485 transmitter |
| Full Duplex and Half Duplex modes available |
| Speeds to 460.8 kbps |
| 16550 UARTs with 16-byte FIFOs |
| All ports share a single PCI interrupt |
| Standard D9 connectors via included cable |
| Windows 95/98/Me/NT/2000/XP/Vista and Linux supported |
| Five year warranty |
DS450
[an error occurred while processing this directive]
QS422 PCI 5V Quad Serial Communications Adapter Board/Card RS422/485 Isolated High Speed
Supports communication speeds up to 10 Mbps
| Fast speed: Default support upto 460K Galvanic Isolated RS422/485 interface |
| Maximum serial communication Baud Rate 10 Megabaud (requires clock change) |
| New State-of-the-art design offers advanced features + Isolation |
| Low Profile Size |
| Low Profile Bracket Height 79.2 mm (3.118") |
| Standard Height bracket available for standard height PCI expansion slot |
| Quadplex Cable Included (HD44M to 4 of DB9M) |
| 16C950 UART |
| 128 Byte Transmit / Receive Buffers |
| ISOLATED TX+ and TX- lines |
| ISOLATED RX+ and RX- lines |
| ISOLATED Ground |
| RS422 / RS485 selectable operation modes |
| RS422 Mode |
| TX and RX ACTIVE |
| RS485 Full / Half Duplex support |
| 25kv ESD Surge Protection (IEC-61000-4-5) |
| RS485 Auto-gating of the transmitter via hardware |
| Plug & Play Compatible |
| Onboard 3KV Isolated DC-DC Converter |
| Support for TX and RX line reversals |
| Slew Rate controlled transceivers for Error-free communications (115k / 500k / 10Mbs |
| Short-Circuit / Thermal and current protected transceivers |
| Device Driver support for: Vista, Win 95/98, Win ME, Win XP/XP Pro, Win NT/NT Server, Win 2000/2003 32/64 bit Server |
| Plug & Play in Linux (Call for RS485 info) |
| 5 year warranty |
QS422
[an error occurred while processing this directive]
DS842 P CI Express 2S Multiport adapter to support 1x, 4x, 8x, 16x Lane bus slots with RS422/RS485 interface
2 (Dual) Serial Port RS422 / RS485 I/O Port Card for your 1x, 4x, 8x, 16x lane PCI Express expansion slot Compatible with all PCI Express motherboards
Introducing the industry's most advanced add-on 2 serial (16950) adapter for PCI Express. This cutting edge design permits a quick installation of 2 of RS422/RS485 serial to any brand of computer system. This single slot, standard height adapter is provided with support for Microsoft Windows 9x, ME, 2000, XP, XP64, NT4, 2003-32 bit, 2003-64 bit and Linux (32/64 bit). Furthermore, Linux users will welcome the ease of installation of this advanced card by not having to recompile kernels, without embedding add-on device drivers, without inserting add-on modules for RS422 interface. The DS842 card is Plug & Play supported by all current Linux kernels.
| Dual (2) High Speed 16C950 Serial Port for PCIe / PCI Express expansion slots |
| Bus design compatible with 1x, 4x, 8x, 16x lane expansion slots |
| Onboard 2 of DB9 Male connectors |
| Standard height mounting |
| Slew rate controlled transceivers |
| CTS+, CTS-, RTS+, RTS- |
| 16C950 UART ( 8x buffer than 16550) |
| 128 Byte Transmit / Receive Buffers |
| RTS / CTS Hardware Auto-Flow Control |
| 10 Megabaud RS422/485 Transceivers |
| Plug & Play Compatible |
| Software Selectable NON-VOLATILE Clock Divisors |
| RS422/485 Electrical Interface |
| 25 kv ESD Surge Serial Port Protection |
| Short-Circuit / Thermal and current protected RS422 / RS485 transceivers |
| Transceivers contain onboard charge pump |
| Device Driver support for: Vista 32/64, Win 95/98, Win ME, Win XP/XP Pro, Win NT/NT Server, Win 2000/2003 & 2003 32/ 64 bit Server, Embedded XP, Plug & Play in Linux (Tested in RH 7.x, 8.x, 9.x, FC1-FC3, ES and more) |
DS842
[an error occurred while processing this directive]
QS842 P CI Express 4S Multiport adapter to support 1x, 4x, 8x, 16x Lane bus slots with RS422/RS485 interface
4 (Quad) Serial Port RS422 / RS485 I/O Port Card for your 1x, 4x, 8x, 16x lane PCI Express expansion slot Compatible with all PCI Express motherboards
Introducing the industry's most advanced add-on 4 serial (16950) adapter for PCI Express. This cutting edge design permits a quick installation of 2 of RS422/RS485 serial to any brand of computer system. This single slot, standard height adapter is provided with support for Microsoft Windows 9x, ME, 2000, XP, XP64, NT4, 2003-32 bit, 2003-64 bit and Linux (32/64 bit). Furthermore, Linux users will welcome the ease of installation of this advanced card by not having to recompile kernels, without embedding add-on device drivers, without inserting add-on modules for RS422 interface. The DS842 card is Plug & Play supported by all current Linux kernels.
| Quad (4) High Speed 16C950 Serial Port for PCIe / PCI Express expansion slots |
| Bus design compatible with 1x, 4x, 8x, 16x lane expansion slots |
| Quadplex Cable Included (HD44M to 4 of DB9M) |
| Standard height mounting |
| Slew rate controlled transceivers |
| CTS+, CTS-, RTS+, RTS- |
| 16C950 UART ( 8x buffer than 16550) |
| 128 Byte Transmit / Receive Buffers |
| RTS / CTS Hardware Auto-Flow Control |
| 10 Megabaud RS422/485 Transceivers |
| Plug & Play Compatible |
| Software Selectable NON-VOLATILE Clock Divisors |
| RS422/485 Electrical Interface |
| 25 kv ESD Surge Serial Port Protection |
| Short-Circuit / Thermal and current protected RS422 / RS485 transceivers |
| Transceivers contain onboard charge pump |
| Device Driver support for: Vista 32/64, Win 95/98, Win ME, Win XP/XP Pro, Win NT/NT Server, Win 2000/2003 & 2003 32/ 64 bit Server, Embedded XP, Plug & Play in Linux (Tested in RH 7.x, 8.x, 9.x, FC1-FC3, ES and more) |
